August 19, 2015 - Backup Battery Charger manages power for control panel alarms.
Battery Operated and Alarm Charger (BOAC) charges backup battery found in control panels using 12 Vdc alarm strobe and horn. With power loss alarm mode switch in enable position, loss of 120 Vac power activates strobe light and horn after 5 sec delay.
February 24, 2015 - M.P. Electronics Announces Additional Benefits of the PMR2 Pump Monitor Relay
The PMR2 Pump Monitor Relay provides Motor Over Temperature and Seal Leakage alarms in one unit for Xylem Flygt Submersible Pumps equipped with FLS or CLS sensors.
August 24, 2014 – M.P. Electronics Announces Latest Firmware Upgrade to SC1000 and SC2000
M.P. Electronics announces its latest firmware revision for its SC1000 and SC2000 Controllers. For the SC2000 Controller, the latest firmware is Version 12, and for the SC1000 Controller, the latest firmware is Version 10. In this firmware change, the Pump Disable inputs can now be inverted via parameter setting selection.
July 22, 2014 - M.P. Electronics Announces Opening of New Training Facility
M.P. Electronics announces that it has just recently
completed the conversion of the upstairs area of its building in Apopka,
Florida into a beautiful training facility.
July 17, 2014 - M.P. Electronics Announces Latest Firmware Upgrade to SC2000 and SC1000
M.P. Electronics announces its latest firmware revision for its SC1000 and SC2000 Controllers. For the SC2000 Controller, the latest firmware is Version 11, and for the SC1000 Controller, the latest firmware is Version 9.
July 16, 2014 - Level Probe Converters Offer Panel Mount Option
Available in deadfront mount versions, Model LPC420 and Model LPC420R with relay outputs enable users to see level information from both front and back.
July 11, 2014 - Transmitter/Receiver Pair Enables Wireless Level Measurement
Able to maintain line of site communications over distances up to 125 ft, Wireless Level Measurement Transmitter and Receiver platform is intended for liquid level (0.0–34.6 ft) measurement.
July 9, 2014 - Submersible Pressure Transducer Withstands Harsh Conditions
Available with pressure range of 5, 10, or 15 psi, Level Monitor includes Kellems Grip for suspending unit in wetwell, as well as Transducer Vent Bellows to keep vent tube moisture-free and able to breathe with atmospheric changes.
June 30, 2014 - Level Probe Converter with Relays - LPC420R
The Level Probe Converter (LPC420R) senses liquid level via the ten electrodes of a Level Probe, and provides ten Relay outputs with contacts that close as the liquid covers the respective Level Probe electrode.
June 27, 2014 - M.P. Electronics Announces Redesigned Sump Pump Exerciser, SPEX-1 with New Features
M.P. Electronics originally released the SPEX-1 in 2012. This product was designed as both a commercial and industrial product to regularly energize Sump Pumps that may go for extended periods of time without being run.
June 26, 2014 - Pump Monitor Relay Warns of Over-temperature, Seal Leakage Events
As replacement for Xylem-Flygt Mini-Cas Relay, PMR2 Pump Monitor Relay provides motor over-temperature and seal leakage alarms for submersible pumps equipped with FLS or CLS sensors.
May 9, 2012 - Trihedral's VTScada Release 10.1 Includes Import Utility for M.P Electronics' SCADA-Ready Controllers
M.P. Electronics is pleased to announce that the latest release of Trihedral's SCADA software, VTScada, now includes an import utility for M.P. Electronics' SCADA ready controllers.
January 24, 2012 - Sump Pump Energizer Ensures Operational Readiness
Designed as commercial and industrial product, The Exerciser® regularly energizes sump pumps that may experience extended periods in which they are not run.
September 6, 2011 - Motor Protection Electronics Introduces the LPC420 Level Probe Converter
The Level Probe Converter is powered by 24VDC, and senses liquid level to provide a 4-20mA analog output for use by a pump controller or PLC for liquid level control. The unit monitors the ten electrodes on a Level Probe, and provides an analog signal that is proportional to the level.
January 5, 2011 - Intrinsically Safe Duplex Controller
M.P. Electronics announces its latest product offering in the newly revised Intrinsically Safe Duplex (ISD) Controller. The ISD Controller has been evaluated and tested to the latest UL913, Version 7 standard for Intrinsic Safety.
December 17, 2010 - MPE Pump Monitor Relay
Apopka, FL - M.P. Electronics introduces the PMR1 Pump Monitor Relay. This product monitors both the OverTemp and Leakage condition in a single unit that is both subpanel and inner/deadfront door mountable. The PMR1 can be used to measure Leakage in one probe to ground, two probes to ground, or probe to probe applications.
May 25, 2010 - MPE 12 Pin, Dual VoltagePhase Monitor
Apopka, FL -- Motor Protection Electronics, a leading manufacturer of industrial controls, is pleased to introduce the new Model 001-DVM-1212 Dual Voltage Phase Monitor. The 12-pin, plug in style unit has dual adjustment ranges from 200 to 240 VAC or 425 to 525 VAC and monitors for under voltage, phase reversal, and phase imbalance. Options include over-voltage monitoring and user-specified reset delay time ranges.
May 25, 2010 - MPE 8 Pin, Dual VoltagePhase Monitor
Apopka, FL -- Motor Protection Electronics, a leading manufacturer of industrial controls, is pleased to introduce the new Model 001-DVM-118 Dual Voltage Phase Monitor. The 8-pin, plug in style unit has dual adjustment ranges from 200 to 240 VAC or 425 to 525 VAC and monitors for under voltage, phase reversal, and phase imbalance. Options include over-voltage monitoring and user-specified reset delay time ranges.
February 15, 2010 - MPE's New Dual VoltagePhase Monitors
M.P. Electronics introduces its new Dual Voltage Phase Monitors!
June 18, 2008 - MPE Level Probe ProvidesYears of Trouble-Free Level Measurement
M.P. Electronics introduces The Level Probe. The Level Probe is a conductance probe, and interfaces with several of the M.P. Electronics products, namely the SC1000, SC2000, and Duplexer Controllers, as well as the Level Probe Relay, p/n LPR-1, and the Intrinsically Safe Barrier, p/n ISB-10.
April 28, 2008 - MPE Duplexer Controller is Re-Designed with New Features
The 010-120-122P Duplexer, a long time favorite product of many users, is getting a much deserved upgrade.